Cordless tools for landscape gardeners

Gardener trimming a beech hedge with a cordless hedge trimmer, with leaf blower, pruning shears and wheelbarrow on the grass

A landscape gardener does more than prune. In a single day you saw branches, trim a hedge, screw a fence together and cut a kerb to size. In the past that meant a van full of petrol machines and a cable reel. With cordless tools on one platform, you do most of the work with the same batteries. Below you can read what to look out for and how to plan your day.

Why battery instead of petrol?

  • Less noise. You work in residential areas, near schools and in parks. A battery tool is quieter, so you can start earlier in the morning without complaints.
  • No exhaust fumes. You don't breathe in petrol fumes, and you can also work in a greenhouse, shed or covered area.
  • Less maintenance. No fuel mixing, no spark plug, no carburettor that won't start after the winter.
  • Instantly on. Press the button and go. No pull cord.

There are downsides too. Runtime is limited, so you have to plan your batteries. And for heavy work that goes on all day, such as large hedges or felling trees, petrol is sometimes still more practical. For most work in private gardens, battery is fine.

Which tools do you need?

Job Tool What to look for
Pruning branches and shrubs Pruning saw or small chainsaw Weight, one-handed use, chain brake
Trimming hedges Hedge trimmer Blade length and tooth spacing for the thickness of the branches
Leaves and pruning waste Leaf blower Air speed and runtime
Fences, decking, pergolas Drill driver and impact driver Torque, long screws without pre-drilling
Decking boards and posts to size Circular saw Cutting depth, saw blade for outdoor timber
Tiles, kerbs, stones Angle grinder with diamond blade Dust mask, guard, disc size

The DCK pruning chainsaw has a 15 cm bar, a chain speed of 8 m/s and weighs 1.2 kg. With it you can saw branches and shrubs one-handed. Check Garden and greenery for the garden tools available on the DCK 20V platform.

One platform for garden and construction

The big advantage of a single battery platform: your garden tools and your construction tools use the same batteries and chargers. The battery that is in the pruning saw in the morning goes into the impact driver for the fence in the afternoon. You need fewer batteries and you don't have to look for the right charger.

Buy the first tool as a kit and the rest as tool only. You can read how that works out in Tool only or kit: how to save on cordless tools.

How many batteries per day?

That depends on your work. A few guidelines:

  • Pruning and driving screws need relatively little. With two 4.0 or 5.0 Ah batteries you get a long way.
  • Tools that run for a long time in a row, such as a hedge trimmer or leaf blower, need more. Plan on 5.0 Ah or larger, and an extra battery.
  • If you work with two people, you need at least three batteries: two in use, one on the charger or as a spare.

Keep track for a week of how many batteries you drain per day. Then you know exactly what you need. You can read more about capacity in Which battery to choose.

Charging on the road

Charge your batteries in the evening at home or in the workshop. That way you start every day with full batteries. If you want to charge during the day, you need power in the van, for example through an inverter or a charging point at the customer's. Never leave a charger unattended in a closed van. Charge in a dry, flat place, not among flammable material.

Working in wet weather

Garden work carries on when it rains, but your batteries don't like water. A few rules:

  • Don't work with a tool or battery that has got wet. Let it dry first.
  • Store spare batteries dry, in the cab or a closed box.
  • Never charge a wet battery.
  • Wipe mud and moisture off the contacts before you put the battery back.

Cold costs runtime. In winter, take the batteries indoors in the evening. Read more in Storing and charging your battery.

Maintaining garden tools

  • Pruning saw and chainsaw: keep the chain sharp and properly tensioned, and check the chain oil.
  • Hedge trimmer: clean the blades after use and oil them lightly.
  • All tools: blow out the ventilation slots. Grass and dust trap heat.

A blunt or poorly tensioned chain is more dangerous and uses more battery. Chains and other wear parts are available to reorder separately.

Business orders

As a landscape gardener you order from ToolMaestro as a business, with an invoice in your company name and your VAT number. From 3 items in your cart you get 5% off, from 10 items 10%. We arrange warranty and repair in the Netherlands, so a broken tool is back quickly. Read more on Business orders.

Frequently asked questions

Can I do a whole working day with cordless tools?

Yes, if you have enough batteries and charge them between jobs or in the evening. Plan on at least two batteries for each tool that runs for a long time.

Do my construction batteries fit garden tools?

Yes. All DCK 20V batteries fit all DCK 20V tools, for garden and construction.

Can I work in the rain with a battery tool?

Light drizzle is usually not a problem, but don't let tools and batteries get wet. Read your tool's manual.

How long can I return something?

You have a 30-day cooling-off period and returning is free. The product must be unused and complete.