An angle grinder is one of the most used tools on site and in the workshop. You use it to cut through metal, smooth welds, cut tiles to size and remove rust. Which one you choose depends on four things: disc size, cordless or mains power, speed and safety features. Below we go through them one by one.
1. Disc size: 115, 125 or 230 mm
The disc size determines how deep you can cut and how large and heavy the tool is.
- 115 mm: compact and light. Fine for small jobs, but the choice of discs is smaller.
- 125 mm: the standard size. The widest choice of discs and a cutting depth of about 30 mm. Enough for tube, flat bar, tiles and most profiles.
- 230 mm: for deep cuts in stone and thick steel. Heavy, and you work with it using two hands and a lot of force.
If in doubt, choose 125 mm. There is a disc for almost every job, and you can find them everywhere.
2. Cordless or mains power
| Cordless | Mains power | |
|---|---|---|
| Freedom | No cable, usable anywhere, including on scaffolding or outdoors | You need a socket or extension reel |
| Run time | Limited by the battery, expect to swap | Unlimited |
| Power | Enough for most work, with a battery of 5.0 Ah or larger | Full power all day |
| Weight | Including battery | Without battery, but with cable |
| Price | Low if you already have batteries | Lower if you don't have batteries yet |
If you work in changing locations and already have batteries for the platform, a cordless grinder is handy. The DCK cordless angle grinder takes 125 mm discs on an M14 spindle, runs at 8500 rpm no-load and weighs 1.3 kg. Use a battery of 5.0 Ah or larger with it.
If you grind all day in the workshop, mains power makes sense. The DCK 1400 W angle grinder runs on 125 mm discs, also on an M14 spindle.
3. Fixed or variable speed
Most grinders run at a fixed, high speed. That is good for cutting and deburring. For other work you want to be able to go lower:
- Polishing and sanding with a flap disc or polishing pad.
- Stainless steel and aluminium, which heat up and discolour quickly at high speed.
- Wire brushes, which shed wires less quickly at a lower speed.
The DCK 1400 W angle grinder has speed control from 3000 to 11,800 rpm. That lets you set it low for polishing and high for cutting.
4. Safety features
Check these points on any angle grinder. They are listed in the specifications or in the manual.
- Restart protection: if the power cuts out or you refit a battery while the switch is on, the tool does not start by itself.
- Adjustable guard: you position it so that the guard is between you and the disc.
- Side handle: can be fitted on the left or right, so you always work with two hands.
- Spindle lock: a button that locks the spindle, so you can change the disc easily.
More about working safely in Working safely with an angle grinder.
Which disc for which job?
The tool is half the story. The disc determines what you can do with it.
| Disc | Use | Material |
|---|---|---|
| Cutting disc, about 1 mm thick | Straight cuts | Steel, stainless steel, profiles, threaded rod |
| Grinding disc, about 6 mm thick | Grinding down welds and edges | Steel |
| Diamond disc | Cutting and chasing | Tiles, stone, concrete, natural stone |
| Flap disc | Sanding and smoothing | Metal, wood |
| Wire brush (cup brush) | Removing rust and paint | Metal |
Always use a disc whose maximum speed is higher than that of your tool. It is printed on the disc label. You'll find discs and attachments under Accessories.
In summary
- Choose 125 mm, unless you have a reason for something else.
- Changing locations and you already have batteries: choose the cordless version with a battery of 5.0 Ah or larger.
- Long days in one place, or lots of polishing: choose mains power with speed control.
- Always check for restart protection, guard and side handle.
You'll find all angle grinders under Grinding. The mains-powered version is also under Corded tools.
Frequently asked questions
Can I fit a 115 mm disc on a 125 mm grinder?
It often fits, but the guard then doesn't line up properly and the peripheral speed is wrong. Use the size the tool is designed for.
Is a cordless grinder powerful enough for cutting?
For tube, flat bar, threaded rod and tiles, yes. For long, heavy cuts in thick steel or concrete, mains power is more practical.
Which battery should I use on a cordless grinder?
At least 5.0 Ah. A smaller battery runs flat quickly and delivers less power under load. Read more in Which battery to choose.
Can I cut wood with an angle grinder?
Never use a toothed saw blade on an angle grinder. The risk of kickback is high. For wood, use a circular saw, jigsaw or reciprocating saw.